If your washing machine doesn’t spin, don’t worry! This common issue can often be fixed with a few troubleshooting steps.

Step 1: Check the Load Balance

An unbalanced load can prevent spinning. Open the washer, redistribute the clothes evenly, and try running the cycle again.

Step 2: Inspect the Lid Switch

Most washers won’t spin if the lid switch is faulty. Open and close the lid to check if you hear a click. If not, the switch may need replacement.

Step 3: Examine the Drive Belt

A worn or broken drive belt can stop the washer from spinning. Unplug the machine, remove the back panel, and check if the belt is loose or damaged. Replace it if necessary.

Step 4: Test the Motor Coupling

The motor coupling connects the motor to the transmission. If it’s broken, the washer won’t spin. Inspect for cracks or wear and replace it if needed.

Step 5: Clean the Drain Pump Filter

A clogged drain pump can prevent the machine from draining, causing spin issues. Locate and clean the filter to ensure proper drainage.

Step 6: Reset the Washer

Sometimes, resetting the washer can resolve the issue. Unplug it for a few minutes, then plug it back in and run a spin cycle.

Step 7: Call a Professional

If these steps don’t work, the motor, control board, or transmission may be faulty. Contact a professional for repairs.

Conclusion

A washer that won’t spin is often an easy fix. By checking the load, lid switch, and other components, you can get it running again. If the problem persists, professional help may be needed.